Knowledge Base
Home » Categories » Electrical Monitoring and Control » DCM100

Is it possible to turn on or off DCM100 NMEA 2000 transmitted messages (or PGNs)?

Yes, it is possible to turn on and off the DCM100 transmitted messages (or PGNs) using Maretron's DSM250 display. On the display, enter menu mode, scroll to "Configuration…" and press enter. Scroll to "Device Configuration…" and press enter. Scroll to the row containing the DCM100 and press enter. Scroll to "NMEA 2000 PGN Enable/Disable..." and press enter. You will see a list of PGNs that the DCM100 transmits. Scroll to the PGN that you want to turn on or off and press enter. Use the up or down arrow keys to choose On or Off and press enter.
Attachments (1) Attachments
Related Articles RSS Feed
With regards to the DCM100, where should I connect the ring terminal of temperature sensor (part number TR3K)?
Viewed 2878 times since Mon, Jun 29, 2009
What messages (or PGNs) does the DCM100 transmit?
Viewed 3679 times since Fri, Nov 7, 2008
Where would I use a DCM100?
Viewed 3352 times since Fri, Nov 7, 2008
I see that Maretron’s DSM150 and DSM250 displays have a DCM100 configuration setting called "Instance:"; what is this?
Viewed 2968 times since Fri, Nov 7, 2008
What is the maximum voltage the DCM100 can sense?
Viewed 2469 times since Fri, Oct 15, 2010
How do I display the DC Ripple Voltage on the DSM250 display?
Viewed 2983 times since Fri, Nov 7, 2008
What are the voltage specifications for each Maretron device?
Viewed 7565 times since Thu, Dec 22, 2011
How do I display the DC State of Charge on the DSM250 display?
Viewed 3132 times since Fri, Nov 7, 2008
How do I reset the DCM100 to send the factory default NMEA 2000 messages (or PGNs)?
Viewed 2540 times since Fri, Nov 7, 2008
What is a DCM100?
Viewed 3334 times since Fri, Nov 7, 2008
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.