Knowledge Base

KB Home | Search | Glossary | Ask Question |

English

How do I display the J2K100 generator average AC frequency on Maretron’s DSM150 or DSM250 display?

Article Number: 240 | Rating: Unrated | Last Updated: Mon, Jun 2, 2014 9:52 PM

You display the J2K100 generator average AC frequency on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the frequency and press enter. Scroll to "Data:" and press enter. Scroll to "AC Power #x" where x is the instance you want to view (instance 2 might be the port generator and instance 3 might be the starboard generator) and press enter. Scroll to "Gen. Avg. AC Frequency" and press enter. Press the back key three times to exit menu mode and return to the normal viewing mode. Scroll through your screens to the favorite screen you selected for frequency.

Attachments (2)

Attachments

J2K100UM_1.2.pdf ( 410 Views, 0 Bytes )
DSM250UM_1.0.pdf ( 398 Views, 0 Bytes )

Related Articles

How do I display the GPS100 twilight PM time on Maretron’s DSM150, DSM200, or DSM250 display?

Viewed 1949 times since Tue, Jun 17, 2008

I see that Maretron’s DSM150, DSM200, and DSM250 displays have a DST100 configuration setting called "Trip log:"; what is this?

Viewed 2000 times since Sun, Jun 22, 2008

How do I set the RAA100 configuration setting called "Gauge Resistance, - to sender" using Maretron’s DSM150, DSM200, or DSM250 display?

Viewed 2292 times since Thu, Jul 10, 2008

Is it possible to change the rate at which the SSC200 transmits NMEA 0183 sentences?

Viewed 2004 times since Thu, Jun 19, 2008

I see that Maretron’s DSM150, DSM200, and DSM250 displays have a TLA100 configuration setting called "Operating Mode:"; what is this?

Viewed 2039 times since Thu, Jun 19, 2008

I see that Maretron’s DSM150, DSM200, and DSM250 displays have a SSC200 configuration setting called "Magnetic Deviation Status?"; what is this?

Viewed 1890 times since Thu, Jun 19, 2008

I have configured my DSM410 or DSM250; how do I perform a backup?

Viewed 3859 times since Tue, Feb 26, 2013

What type of tank senders does the TLA100 work with?

Viewed 2264 times since Fri, Jun 20, 2008

How do I set the J2K100 configuration setting called "J1939 Diagnostic Messages:" using Maretron’s DSM150 or DSM250 display?

Viewed 2275 times since Thu, Jan 14, 2010

Is the J2K100 compatible with Northern Lights Generators? If so, which ones?

Viewed 2090 times since Thu, Jan 14, 2010

Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.