Knowledge Base
Home » Categories » Multiple Categories

How do I display the J2K100 engine coolant temperature on Maretron’s DSM150, DSM200, or DSM250 display?

You display the J2K100 engine coolant temperature on a DSM150, DSM200, or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the coolant temperature and press enter. Scroll to "Data:" and press enter. Scroll to "Engine #x" where x is the engine instance you want to view (instance 0 is single or port engine and instance 1 is the starboard engine) and press enter. Scroll to "Coolant Temperature" and press enter. Press the back key three times to exit menu mode and return to the normal viewing mode. Scroll through your screens to the favorite screen you selected for coolant temperature.
Attachments (1) Attachments
Related Articles RSS Feed
I have configured my DSM410 or DSM250; how do I perform a backup?
Viewed 6151 times since Tue, Feb 26, 2013
I navigate using true heading and not magnetic heading; how do I use the SSC200 compass and N2KView software to view my heading in true?
Viewed 5187 times since Fri, Jul 18, 2008
How do I display the TLA100, TLM100, TLM150, or TLM200 tank capacity on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 3795 times since Fri, Jun 20, 2008
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a WSO100 configuration setting called "Reset Factory Defaults"; what is this?
Viewed 2698 times since Sat, Aug 2, 2008
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a J2K100 configuration setting called "NMEA 2000 PGN Enable/Disable..."; what is this?
Viewed 3442 times since Thu, Jan 14, 2010
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a SSC200 configuration setting called "Rate of Turn Damping Period:"; what is this?
Viewed 2977 times since Thu, Jun 19, 2008
If I use the J2K100 with my Onan generator that has a power rating between 4-32kW, what data can I expect to see on the NMEA 2000 network?
Viewed 4484 times since Thu, Jan 14, 2010
How do I display the GPS100 Speed Over Ground (SOG) using Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2812 times since Tue, Jun 17, 2008
Can Maretron devices be displayed on a Raymarine Seatalk NG network?
Viewed 10777 times since Wed, Feb 25, 2015
How do I display the SSC200 roll angle on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2770 times since Thu, Jun 19, 2008
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.