Knowledge Base

KB Home | Search | Glossary | Ask Question |

English

Is J1939 similar to NMEA 2000 in that the J1939 network requires terminators?

Article Number: 220 | Rating: Unrated | Last Updated: Thu, Jul 16, 2015 10:08 PM

Yes, J1939 and NMEA 2000 both use CAN technology where network topology requires terminators on both ends of the trunk or backbone. Please refer to the application note entitled, "Interfacing J1939 Engines and/or Gensets to an NMEA 2000® Network Using Maretron's J1939 to NMEA 2000® Gateway (J2K100)".

Attachments (1)

Attachments

J2K100UM_1.2.pdf ( 841 Views, 0 Bytes )

Related Articles

How do I set the J2K100 configuration setting called "J1939 Diagnostic Messages:" using Maretron’s DSM150 or DSM250 display?

Viewed 3433 times since Thu, Jan 14, 2010

How do I display the J2K100 generator average line-line AC voltage on Maretron’s DSM150 or DSM250 display?

Viewed 3698 times since Thu, Jan 14, 2010

How do I perform J2K100 quick setup using the N2KAnalyzer program?

Viewed 32060 times since Wed, Oct 10, 2012

I see that Maretron’s DSM150, DSM200, and DSM250 displays have a J2K100 configuration setting called "NMEA 2000 Transmission Instance:"; what is this?

Viewed 3716 times since Thu, Jan 14, 2010

Which engines and generators work with the J2K100?

Viewed 4292 times since Thu, Jan 14, 2010

Using N2KAnalyzer, how do I recover a Maretron device?

Viewed 5418 times since Thu, Dec 22, 2011

How do I display the J2K100 transmission oil temperature on Maretron’s DSM150, DSM200, or DSM250 display?

Viewed 3578 times since Thu, Jan 14, 2010

What are the approximate dimensions of the J2K100?

Viewed 3214 times since Thu, Jan 14, 2010

What are the voltage specifications for each Maretron device?

Viewed 8439 times since Thu, Dec 22, 2011

Which Onan generators come standard with a J1939 interface?

Viewed 4473 times since Thu, Jan 14, 2010

Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.