Knowledge Base
Home » Categories » Multiple Categories

How do I reset the DST100 trip log using Maretron’s DSM150, DSM200, or DSM250 display?

You reset the DST100 trip log using a DSM150, DSM200, or DSM250 in the following way.

  1. Enter the menu mode, scroll to "Configuration..." and press < Enter >
  2. Scroll to "Device Configuration..." and press < Enter >
  3. Scroll to the DST100 and press < Enter >
  4. Scroll to "Trip Log" and press < Enter >
  5. With "Reset" highlighted press < Enter >
  6. Notice that the number changes to 0.0 which indicates that the trip log has been reset to zero.
  7. Since the trip log information is stored within the DST100, a reset only needs to be done from a single DSM150, DSM200, or DSM250 and all other Maretron displays will show that the trip log has been zeroed.
Attachments Attachments
There are no attachments for this article.
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.