Knowledge Base
Home » Categories » Multiple Categories

How do I display the GPS100 twilight AM time on Maretron’s DSM150, DSM200, or DSM250 display?

The GPS100 doesn't actually compute and transmit the twilight AM time over an NMEA 2000 network. However, the DSM150, DSM200, and DSM250 receive enough information from the GPS100 (time and position) to compute the twilight AM time. You display the twilight AM time on a DSM150, DSM200, or DSM250 in the following way:

  1. Enter menu mode, scroll to "Favorite Screen Setup..." and press < Enter >
  2. Scroll to the favorite screen where you would like to view the twilight AM time and press < Enter>
  3. Scroll to "Data:" and press < Enter >
  4. Scroll to "Time" and press < Enter>
  5. Scroll to "Twilight AM" and press < Enter>
  6. Press the < Back > key three times to exit menu mode and return to the normal viewing mode
  7. Scroll through your screens to the favorite screen you selected for twilight AM time
Attachments Attachments
There are no attachments for this article.
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.