Knowledge Base
Home » Categories » Multiple Categories

How do I display the GPS100 UTC date on Maretron’s DSM150, DSM200, or DSM250 display?

You display the GPS100 UTC date information on a DSM150, DSM200, or DSM250 in the following way:

  1. Enter menu mode, scroll to "Favorite Screen Setup..." and press < Enter >
  2. Scroll to the favorite screen where you would like to view the UTC date and press < Enter >
  3. Scroll to "Data:" and press < Enter >
  4. Scroll to "Time" and press < Enter >
  5. Scroll to "Date UTC" and press < Enter >
  6. Press the < Back > key three times to exit menu mode and return to the normal viewing mode
  7. Scroll through your screens to the favorite screen you selected for UTC date
Attachments Attachments
There are no attachments for this article.
Related Articles RSS Feed
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a TLA100 configuration setting called "Operating Mode:"; what is this?
Viewed 2050 times since Thu, Jun 19, 2008
How do I display the J2K100 engine percent load on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2514 times since Thu, Jan 14, 2010
How do I display the TLA100, TLM100, TLM150, or TLM200 tank capacity on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2620 times since Fri, Jun 20, 2008
How do I make the SSC200 agree with other compasses on the vessel, or, in other words, how do I align the SSC200 with the boat?
Viewed 2154 times since Mon, Jun 25, 2012
When I am creating a favorite screen on the DSM150 or DSM250, I see an "Instance:" menu item; what does this mean?
Viewed 2205 times since Thu, Mar 5, 2009
Is it possible to turn on or off RAA100 transmitted messages (or PGNs)?
Viewed 2305 times since Fri, Jul 11, 2008
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a SSC200 configuration setting called "Magnetic Deviation Calibration?"; what is this?
Viewed 2172 times since Thu, Jun 19, 2008
How do I know if the GPS100 is locked on and producing a position fix using Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2061 times since Tue, Jun 17, 2008
How do I display the J2K100 engine oil pressure on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2843 times since Thu, Jan 14, 2010
Can I turn On and Off loads connected to the DCR100 using the DSM150 or DSM250?
Viewed 2519 times since Thu, May 5, 2011
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.