Knowledge Base

KB Home | Search | Glossary | Ask Question |

English

I see that Maretron’s DSM150 and DSM250 displays have a SSC200 configuration setting called "NMEA 2000 PGN Enable/Disable..."; what is this?

Article Number: 125 | Rating: Unrated | Last Updated: Mon, Jul 13, 2015 4:05 AM

Maretron's DSM150 and DSM250 displays have a SSC200 configuration setting called "NMEA 2000 PGN Enable/Disable:", which is used to turn on and off specific NMEA 2000 messages that are transmitted by the SSC200.

Attachments

Attachments

There are no attachments for this article.

Related Articles

How do I make the SSC200 agree with other compasses on the vessel, or, in other words, how do I align the SSC200 with the boat?

Viewed 2844 times since Mon, Jun 25, 2012

How do I display Tank level on a DSM410?

Viewed 2340 times since Tue, Jul 10, 2018

How do I reset the TLA100 to send the factory default messages (or PGNs)?

Viewed 2540 times since Fri, Jun 20, 2008

Which Maretron products are necessary in order to display apparent wind?

Viewed 4042 times since Wed, Apr 10, 2013

What is the procedure for testing the ALM100 Annunciator?

Viewed 4358 times since Thu, Jan 8, 2015

How do I set up my SMS100 address book using Maretron displays?

Viewed 2961 times since Thu, Jun 6, 2013

What information is available from the fluid pressure monitor (FPM100) and can be viewed on Maretron’s displays?

Viewed 3130 times since Fri, Jun 21, 2013

I have configured my DSM410 or DSM250; how do I perform a backup?

Viewed 5590 times since Tue, Feb 26, 2013

How do I display UTC from the GPS100 on Maretron’s DSM150, DSM200, or DSM250 display?

Viewed 3273 times since Mon, Jun 25, 2012

What are the voltage specifications for each Maretron device?

Viewed 7565 times since Thu, Dec 22, 2011

Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.