Knowledge Base
Home » Categories » Multiple Categories

Is it possible to change the rate at which the SSC200 transmits NMEA 0183 sentences?

Yes, you can change how often the SSC200 transmits messages over the NMEA 0183 network. There are two ways to change the rate at which NMEA 0183 sentences are transmitted: 1) using Maretron's DSM150, DSM200, or DSM250 display, or 2) sending the SSC200 a proprietary NMEA 0183 message using a terminal emulator (please see the SSC200 user manual).

To set the NMEA 0183 sentence rate using Maretron's DSM150, DSM200, or DSM250 display:

  1. Enter menu mode, scroll to "Configuration:" and press < Enter >
  2. Scroll to "Device Configuration:" and press < Enter >
  3. Scroll to the row containing the SSC200 and press < Enter >
  4. Scroll to "NMEA 0183 Settings..." and press < Enter >
  5. Scroll to "Sentence/Rate Selection" and press < Enter >
  6. You will see a list of sentences that the SSC200 transmits. Scroll to the sentence that you want to turn on or off and press < Enter >
  7. Use the < Up > or < Down > arrow keys to choose "Disable", which will prevent the sentence from being transmitted or choose the period at which the sentence will be transmitted
Attachments Attachments
There are no attachments for this article.
Related Articles RSS Feed
Using N2KAnalyzer, how do I recover a Maretron device?
Viewed 2876 times since Thu, Dec 22, 2011
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a DST100 configuration setting called "Speed Calibration..."; what is this?
Viewed 2522 times since Sun, Jun 22, 2008
How do I display the TLA100, TLM100, TLM150, or TLM200 tank capacity on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2870 times since Fri, Jun 20, 2008
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a SSC200 configuration setting called "Rate of Turn Zero Offset Calibration..."; what is this?
Viewed 2223 times since Sat, Jul 19, 2008
I see that Maretron’s DSM150, DSM200, and DSM250 displays have a J2K100 configuration setting called "NMEA 2000 PGN Enable/Disable..."; what is this?
Viewed 2574 times since Thu, Jan 14, 2010
Why does the SSC200 rate of turn indicate that I am turning when I am not turning?
Viewed 2172 times since Thu, Jun 19, 2008
I see that Maretron’s DSM150 and DSM250 displays have a SSC200 configuration setting called "NMEA 2000 PGN Enable/Disable..."; what is this?
Viewed 2211 times since Thu, Jun 19, 2008
Why does my GPS100 transmit the wrong year?
Viewed 2587 times since Sat, Aug 2, 2008
What is the maximum rate at which the SSC200 will transmit heading from the NMEA 0183 port?
Viewed 1993 times since Thu, Jun 19, 2008
How do I display the J2K100 engine coolant temperature on Maretron’s DSM150, DSM200, or DSM250 display?
Viewed 2680 times since Sat, Jun 25, 2011
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.