How do I reset the SSC200 to send the factory default NMEA 0183 sentences?

You reset the SSC200 to transmit the factory default NMEA 0183 messages using Maretron's DSM150, DSM200, or DSM250 display in the following way:

1. Enter menu mode, scroll to "Configuration:" and press < Enter >
2. Scroll to "Device Configuration:" and press < Enter >
3. Scroll to the row containing the SSC200 and press < Enter >
4. Scroll to "NMEA 0183 Settings..." and press < Enter >
5. Scroll to "Load Default Sentence/Rate Selection" and press < Enter >