Maretron support knowledge base
Maretron Knowledge Base

Knowledgebase Home | Glossary | Favorites | Contact Knowledgebase Home | Glossary | Favorites | Contact
Search the Knowledgebase Browse by Category
Advanced Search
* Query:
  Categories:
  Rated:
  Custom Fields:
Search Results for "dsm200"
There were 156 articles found for your query: (Page 1 of 8)     «« |  Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Next | »»
  1. What is ground wind?What is ground wind?
    Ground wind is the speed and direction of the wind referenced to a compass rose, which is different than apparent and true wind which are referenced to the bow of the boat. The apparent and true wind ...

  2. Which Maretron products are necessary in order to display ground wind?Which Maretron products are necessary in order to display ground wind?
    In addition to a Maretron display product (DSM200, DSM250, or N2KView), you will need the following Maretron sensors in order to display ground wind. You will need a SSC200 compass (for vessel heading...

  3. Why is the WSO100 wind direction incorrectly displayed on my display?Why is the WSO100 wind direction incorrectly displayed on my display?
    WSO100 will not show the correct wind direction if it hasn't been aligned with the boat. You align the WSO100 in one of two ways, 1) align the post (there are three post attaching the top of the...

  4. I see that Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Installation Offset Calibration...", what is this?I see that Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Installation Offset Calibration...", what is this?
    Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Installation Offset Calibration...", which is used to electronically align the WSO100 with the vessel. Although the WS...

  5. How do I set the WSO100 installation offset using Maretron's DSM200 or DSM250 display?How do I set the WSO100 installation offset using Maretron's DSM200 or DSM250 display?
    You set the WSO100 installation offset using Maretron's DSM200 or DSM250 display in the following way. Enter menu mode, scroll to "Configuration…" and press enter. Scroll to "Device Configuratio...

  6. How do I clear the WSO100 installation offset using Maretron's DSM200 or DSM250 display?How do I clear the WSO100 installation offset using Maretron's DSM200 or DSM250 display?
    You clear the WSO100 installation offset using Maretron's DSM200 or DSM250 display in the following way. Enter menu mode, scroll to "Configuration…" and press enter. Scroll to "Device Configurat...

  7. How do I display the WSO100 apparent wind on Maretron's DSM200 or DSM250 display?How do I display the WSO100 apparent wind on Maretron's DSM200 or DSM250 display?
    You display the WSO100 apparent wind on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would li...

  8. How do I display the WSO100 true wind referenced to water speed on Maretron's DSM200 or DSM250 display?How do I display the WSO100 true wind referenced to water speed on Maretron's DSM200 or DSM250 display?
    You display the WSO100 true wind on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like t...

  9. How do I display the WSO100 true wind referenced to ground speed on Maretron's DSM200 or DSM250 display?How do I display the WSO100 true wind referenced to ground speed on Maretron's DSM200 or DSM250 display?
    You display the WSO100 true wind on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like t...

  10. How do I display the WSO100 barometric pressure on Maretron's DSM200 or DSM250 display?How do I display the WSO100 barometric pressure on Maretron's DSM200 or DSM250 display?
    You display the WSO100 barometric pressure on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you wo...

  11. I see that Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Barometric Pressure:", what is this?I see that Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Barometric Pressure:", what is this?
    Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Barometric Pressure:", which is used to adjust the WSO100 barometric pressure reading to account for local variation. ...

  12. I see that Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Outside Temperature:", what is this?I see that Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Outside Temperature:", what is this?
    Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Outside Temperature:", which is used to adjust the WSO100 outside temperature reading to account for local variation. ...

  13. How do I display the WSO100 outside temperature on Maretron's DSM200 or DSM250 display?How do I display the WSO100 outside temperature on Maretron's DSM200 or DSM250 display?
    You display the WSO100 outside temperature on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you wo...

  14. I see that Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Outside Humidity:", what is this?I see that Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Outside Humidity:", what is this?
    Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Outside Humidity:", which is used to adjust the WSO100 outside humidity reading to account for local variation. For ex...

  15. How do I display the WSO100 outside humidity on Maretron's DSM200 or DSM250 display?How do I display the WSO100 outside humidity on Maretron's DSM200 or DSM250 display?
    You display the WSO100 outside humidity on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would...

  16. I see that Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Wind Data Damping Period:", what is this?I see that Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Wind Data Damping Period:", what is this?
    Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "Wind Data Damping Period:", which is used to smooth the wind speed and direction information transmitted from the WSO1...

  17. I see that Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "NMEA 2000 PGN Enable/Disable...", what is this?I see that Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "NMEA 2000 PGN Enable/Disable...", what is this?
    Maretron's DSM200 and DSM250 displays have a WSO100 configuration setting called "NMEA 2000 PGN Enable/Disable…", which is used to turn on and off specific messages that are transmitted by the W...

  18. Is it possible to turn on or off WSO100 transmitted messages (or PGNs)?Is it possible to turn on or off WSO100 transmitted messages (or PGNs)?
    Yes, it is possible to turn on and off the WSO100 transmitted messages (or PGNs) using Maretron's DSM200 or DSM250 display. On the display, enter menu mode, scroll to "Configuration…" and press ...

  19. Using the N2KAnalyzer how do I recover a device?Using the N2KAnalyzer how do I recover a device?
    The N2KAnalyzer software can restore a devices software using the following method: Select the affected device(represented by a row with light gray serial number shown), right-click ...

  20. What components does Maretron recommend in order to view environment information at the top of a Mast?What components does Maretron recommend in order to view environment information at the top of a Mast?
    For Mast installations greater than 20 feet Maretron recommends the following items: WSO100-01 Ultrasonic Wind/Weather Station IT-CM-CF Micro Inline Terminator DF-D...

(Page 1 of 8)     «« |  Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Next | »»

Powered by Interspire Knowledge Manager Knowledgebase Software