Downloads
Product Demos

This section contains demonstration versions of Maretron software products and software emulation versions of Maretron hardware display products.

  • N2KView (Windows XP/2000/Vista/7/8/9/10) (Version 6.0.6.20180724, 96.7 MB, updated July 24, 2018)

    Download and install Maretron's N2KView® vessel monitoring and control system to see the wide variety of vessel monitoring data that can be brought to any network-connected PC, tablet or smart phone. This is the same software as a full functioning version of N2KView®, and may be licensed without the need to re-install for full operational use.

    • No N2KServer™ component is included or required to run in demo mode.
    • In demo mode, it will not connect to a N2KServer™ over the network. It displays only internally-generated demonstration data.
    • No hardware license key is required.

  • N2KView (MAC) (Version 6.0.6.20180724, 79.5 MB, updated July 24, 2018)

    First, download and install Adobe AIR from www.adobe.com, and then download N2KView® using the above link.

  • DSM150/DSM250/DSM410 PC Demo (Windows XP/2000/Vista/7/8/9/10) (Version 1.7.5.3, 4.0 MB, updated January 24, 2018)
  • This is a PC-based demonstration program for the DSM250, or DSM410 hardware display. You can download and install this to test-drive any of the DSM displays and experience the wealth of information the DSM250/DSM410 can deliver anywhere on the vessel.

Windows Device Drivers

This section contains Windows device drivers for Maretron Products.

Firmware Updates

Use N2KAnalyzer to update the firmware on all Maretron devices through the NMEA 2000® bus. All required firmware image files for these devices are included with the N2KAnalyzer® tool. Once you have downloaded and installed the latest version of N2KAnalyzer®, you have the latest firmware for all your Maretron® devices on your computer and can update them without needing to make another Internet connection.

Download the latest version of N2KAnalyzer® from the Software Tools section to update the firmware on your devices.

Software Downloads
  • N2KAnalyzer with Firmware Images (Windows XP/2000/Vista/7/8/9/10) (Version 2.4.20.1, 33.3 MB, updated July 10, 2018)

    Maretron's N2KAnalyzer® software allows you to view NMEA 2000® messages as well as update firmware on all field-updateable Maretron® hardware products.

    Use N2KAnalyzer to update the firmware on all Maretron devices through the NMEA 2000® bus. All required firmware image files for these devices are included with the N2KAnalyzer® tool. Once you have downloaded and installed the latest version of N2KAnalyzer®, you have the latest firmware for all your Maretron® devices on your computer and can update them without needing to make another Internet connection.

    N2KAnalyzer® requires the use of a Maretron® IPG100 or USB100 gateway to connect your PC to the NMEA 2000® bus. NMEA 2000® gateways from other manufacturers are not compatible with N2KAnalyzer®.

    IF YOU ARE RUNNING N2KANALYZER VERSION 2.1.14, YOU WILL NEED TO MANUALLY DOWNLOAD AND INSTALL N2KANALYZER TO UPDATE TO A NEWER VERSION. VERSION 2.1.14 WILL NOT AUTOMATICALLY UPDATE TO A NEWER VERSION!

  • N2KBuilder Software Request Form

    N2KBuilder® software is a powerful, free PC-based tool for designing and verifying the integrity of NMEA 2000® networks. N2KBuilder® software, when installed on a Windows PC and used as part of an integrated design workflow, can be used to layout, document, and validate the design of complex NMEA 2000® networks. In addition, it will directly produce a Bill of Materials (BOM) for Maretron® products, eliminating guesswork and transcription errors.

  • N2KView (Windows XP/2000/Vista/7/8/9/10) (Version 6.0.6.20180724, 96.7 MB, updated July 24, 2018)
  • Once installed, N2KView® will check the Maretron® servers for updates if connected to the internet. If an update is available, the user will be requested to install the update directly from N2KView®. There should be no need to request updates from this page.

    If you are still using N2KView® version 2.x or 3.x, please use this link to update to version 6.x

  • N2KServer (Windows XP/2000/Vista/7/8/9/10) (Version 4.0.1.1, 32.2 MB, updated July 23, 2018)
  • If N2KView is installed or updated using the above link, it is not neccesary to install N2KServer. If N2KView reports that N2KServer is out of date, then use this link to download the latest version of N2KServer. N2KServer will not run on a Mac.

    NOTE: A Maretron N2KView®/N2KServer® hardware license key is required to use this product with N2KView.

  • N2KView (MAC) (Version 6.0.6.20180724, 79.5 MB, updated July 24, 2018)
  • Before installing N2KView, please download and install Adobe AIR from www.adobe.com

    Once installed, N2KView® will check the Maretron® servers for updates if connected to the internet. If an update is available, the user will be requested to install the update directly from N2KView®. There should be no need to request updates from this page.

  • N2KView (TSMxxx/MBBxxx) (Version 6.0.6.20180724, 80.1 MB, updated July 24, 2018)
  • Download and run the above program on a PC to create a USB drive that can be used to update N2KView in the TSMxxx or MBBxxx. This is a large file, and may take several minutes to download.

    Detailed software update instructions (pdf)

  • N2KExtractor (Windows XP/2000/Vista/7/8/9/10) (Version -4.0.0.20180523, 85.1 MB, updated May 23, 2018)
  • N2KExtractor software loads data to graph or produce .csv files from

    • A USB Memory Stick produced by Maretron's VDR100
    • An Ethernet connection to a VDR100
    • Maretron's Telemetric Cloud Service

    From version 3.0.1 of N2KExtractor, you are now able to erase a USB drive directly on the PC from within N2KExtractor. This functionality is dependant on new disk drivers that are not installed when the automatic update function is run from within N2KExtractor. For this reason, it is recommended that the update to N2KExtractor version 3.0.1 is done from the above link.

    Once installed, N2KExtractor® will check the Maretron® servers for updates if connected to the internet. If an update is available, the user will be requested to install the update directly from N2KExtractor®. There should be no need to request updates from this page.