Sailboat Example - Intermediate System

MSRP $8,049.80

Network Diagram
  • Overview
  • Downloads
  • Text message screenshots
  • DSM410/DSM250 screenshots

This intermediate monitoring system will monitor important parameters on your sailboat, displaying vessel heading, position, depth, speed, battery, shore power, temperatures, bilge pumps, doors and fire alarms on three sunlight readable displays. Even when you are off the boat, you can still receive status and alert text messages on your phone.

The following table shows the products included within this example system plus a list of the information or data available for display.

Product Description Available Data List
DSM410 Port Helm Pod Display Displays data in this list, monitors the data and sounds an internal or external buzzer if there is a problem and sends a text message out via the SMS100
DSM410 Stbd Helm Pod Display Displays data in this list, monitors the data and sounds an internal or external buzzer if there is a problem and sends a text message out via the SMS100
DSM250 Nav Station display Displays data in this list, monitors the data and sounds an internal or external buzzer if there is a problem and sends a text message out via the SMS100.
SMS100 Texting module Sends text messages to one or more phone numbers when any monitored data in this list goes outside programmed limits
SSC300 Compass Monitors magnetic heading, rate of turn and pitch and roll
GPS200 Cabin top GPS Position, speed over ground, course over ground, time, date, magnetic variation and more
DST110 Depth/Speed/Water Temp Measures water depth, speed through water, sea temperature, trip log and cumulative log
SIM100 Switch indicator 3 high bilge water indicators, magnetic door switch, smoke/heat detector, CO detector
ALM100 Alarm buzzer Sounds a loud buzzer when any monitored data in this list goes outside programmed limit
DCM100 Battery monitor Monitors battery voltage, current, temperature, state of charge and time remaining
ACM100 Shore power monitor Monitors voltage, current, frequency and power
TMP100 Temperature monitor Monitors cabin temperature, engine room temperature, alternator temperature, refrigerator temperature
RIM100 Run indicator Monitors pump breaker status, pump run status, counts and times pump runs

The following screenshots (click to enlarge) are examples of Text Messages you can receive when monitoring these values.

Boat Moving Alarm

Door Open Alarm

High Bilge Water Alarm

Low Battery Alarm

Low Cabin Temperature

Shore Power Fail

Smoke Alarm

Status response

The following screenshots (click to enlarge) are examples of how monitored data can be displayed on the DSM410 / DSM250.

Alternator Temp Gauge

Battery Current

Battery Parameters

Battery State Of Charge

Battery Temperature

Battery Voltage

COG Course Up Rose

Depth Digital

Depth Graph

EGT Gauge

GPS Status

Heading Cardinal

Heading Head Up

Heading North Up

Inclinometer

Lat Lon

Local Time and Date

Moon

Pitch Roll

Rate of Turn

Refrigerator Temperature Gauge

Run Counter and Timer

Run Indicators Off

Run Indicators On

Sea Temp Digital

Shore Power Current

Shore Power Frequency

Shore Power Parameters

Shore Power Voltage

Shore Total Power Used

SOG and COG

SOG Gauge

STW Digital

STW Gauge

Sunrise and Sunset

Switch Indicators Off

Switch Indicators Off Color

Switch Indicators On

Switch Indicators On Color

Total Trip Log

UTC Time and Date

Variation