Battery Switch Monitoring and Control - Intermediate System

MSRP $2,465.90

Network Diagram
  • Overview
  • Downloads
  • DSM410 Screenshots
  • N2KView components
  • Wiring diagram

This intermediate system allows the Blue Seas Systems remote battery switch to be monitored and controlled over an NMEA 2000 network using Maretron’s 4.1” color display. The state of the battery (On or Off) is indicated on the display and the battery switch can be turned On or Off from the display. In addition, the Ethernet gateway (IPG100) and WiFi/Router allow a Smartphone or tablet device running N2KView® Mobile to monitor and control the battery switch.

The following table shows the products included within this example system plus a list of the information or data available for display.

Product Description Available Data List
DSM410 Helm Pod Display Displays data in this list, monitors the data and sounds an internal buzzer if there is a problem
IPG100 N2K to ethernet NMEA 2000 to ethernet gateway
E2500 Wifi router Allows monitoring wirelessly or wired onboard, or remotely with internet connection
RIM100 Run Indicator Monitors battery switch status (On/Off), counts and times battery switch On/Off
DCR100 DC Relay Turns battery switch On/Off

The following screenshots (click to enlarge) are examples of how the bilge status will be displayed on the DSM410.

Battery Switch (Connected)

Battery Switch (Disconnected)

Battery Switch Counter Timer

The following components (click to enlarge) are examples of how monitored data can be displayed on a PC, tablet or smartphone using N2KView or N2KView Mobile. The components are arranged on favourite screens at positions and sizes to suit the user's needs. See N2KView web page for exampes of full screenshots.

Battery Switch (Connected)

Battery Switch (Disconnected)

Battery Switch Counter

Battery Switch Timer