Knowledge Base

Articles: Search Results

  1. What IP settings does Maretron recomended for the IPG100 connection to a dedicated N2KView device (DSM800 or MBB100) to work properly? Maretron recommends the following configuration setting to successfully make a connection between N2KView running on a DSM800 or MBB100 to the IPG100. First, configure the IPG100 using N2KAnalyzer, a DSM150, or a DSM250. The procedure for configuring... Read More
  2. What are the minimum and maximum supported display resolutions for the MBB100 VGA output? The maximum supported display resolution for the MBB100 VGA output is 1900x1200.The minimum supported display resolution is 800x480.To review your resolution settings on the MBB100, in N2KView, select the "Commands & Settings->Configuration->Scre... Read More
  3. Which touch screen drivers work with the MBB100 and MBB200C? Touchscreen Drivers that the MBB100 and MBB200C will support are: eGalax     NavPixel Screens 3M         3M Microtouch ELO        ELO Touch Systems TSharc    Hampshire TSharc driversUpon connecting your touch screen to the MBB100 or MBB200C, sele... Read More
  4. What are the latest changes that have been made to N2KView? Maretron announces the release of version 5.1.5 of the N2KView® NMEA 2000® Network Display Software.  The program is available from (http://www.maretron.com/downloads), under the “Software Updates” category. The full build number of the version is 5.... Read More
  5. Using N2KAnalyzer, how do I recover a Maretron device? Occasionally, a device can be in "boot mode" (represented in N2KAnalyzer by an orange highlight of the device's entry in the device list). This can happen due to a software update which fails due to network problems.A Maretron device that is not... Read More
  6. What are the latest changes that have been made to N2KBuilder?  What are the latest changes that have been made to N2KBuilder?The program is also available from (http://www.maretron.com/downloads), under the “Software Tools” category.  The full build number of the version is 1.11.22.20161014.                    ... Read More
  7. What are the voltage specifications for each Maretron device? Maretron ModelDevice DescriptionNMEA2000 Operating VoltageEngine/Battery InterfaceCLM100 P/N: M000070 Current Loop Monitor9 to 32 Volts SSC200 P/N: M000001, M000021, M000022NMEA 2000 Solid State Compass HW 1.09 to 16 Volts SSC300 P/N: M000051NMEA ... Read More
  8. What platforms does N2KView run on, and how does the licensing work? Maretron's N2KView vessel monitoring and control software runs on dedicated hardware like Maretron's DSM800 or MBB100, or the N2KView software runs on Personal Computers (PC). Please see the file attached to the bottom of this article showi... Read More
  9. How do I update my N2KServer license key to support multiple N2KView features? As shipped from the factory, N2KView supports one connected client (which can be N2KView running on a PC or mobile phone, a MBB100 Black Box for Vessel Monitoring and Control, TSM800/1330C (Touch Screen Display) or  DSM800 Vessel Monitoring and Contr... Read More
  10. What firmware changes have taken place on the Maretron IPG100 Module? You can update the IPG100 using the N2KAnalyzer software tool.4.0.7.5 (2016-08-29):Corrected a problem where, with certain routers, the DHCP-assigned IP address could change every 5 minutes (1958)4.0.2.0 (2015-03)Corrected an issue where the IPG100 l... Read More
Subscribe to knowledgebase
Get notified when new articles are added to the knowledgebase.