Privacy Policy  |  Contact Us
Maretron Support Knowledge Base

Knowledgebase Home | Glossary | Favorites | Contact Knowledgebase Home | Glossary | Favorites | Contact
Search the Knowledgebase Browse by Category

[Advanced Search]
Advanced Search
* Query:
  Categories:
  Rated:
  Custom Fields:
Search Results for "dst100"
There were 43 articles found for your query: (Page 1 of 3)     «« |  Prev | 1 | 2 | 3 | Next | »»
  1. What is the difference between true wind relative to the ground and true wind relative to the water?What is the difference between true wind relative to the ground and true wind relative to the water?
    True wind is computed by subtracting the vessel speed from the apparent wind. The vessel speed is either referenced to the water (Speed Through Water (STW)) or the vessel speed is referenced to the gr...

  2. Which Maretron products are necessary in order to display true wind relative to water?Which Maretron products are necessary in order to display true wind relative to water?
    In order to display true wind relative to water, you will need a WSO100, a DST100, and a display capable of computing true wind relative to water. The WSO100 measures the apparent wind while the DST10...

  3. What are the Voltage specifications for each Maretron device?What are the Voltage specifications for each Maretron device?
    Maretron Model Operating Voltage Engine/Battery Interface USB100 9 to 16 Volts ...

  4. Why is the DST100 Speed Through Water (STW) reading different than Speed Over Ground (SOG) reading?Why is the DST100 Speed Through Water (STW) reading different than Speed Over Ground (SOG) reading?
    Speed Over the Ground (SOG) is the speed of the vessel relative to the surface of the earth. Speed Through Water (STW) is the speed of the vessel relative to the water. It is possible for the STW to b...

  5. What is a DST100?What is a DST100?
    A DST100 is a product that is mounted through the hull below the water line of a vessel and is used to measure water depth, speed through water, sea water temperature, depth transducer offset, resetta...

  6. What information does the DST100 provide?What information does the DST100 provide?
    The DST100 transducer provides the following information; 1) Speed Through Water (STW), 2) water depth, 3) depth transducer offset, 4) trip log, 5) total distance log, and 6) sea temperature.

  7. What messages (or PGNs) does the DST100 transmit?What messages (or PGNs) does the DST100 transmit?
    The DST100 transmits the following messages (or PGNs). PGN 128259 - Speed, Water Referenced (Fields: 1-SID, 2-Speed Water Referenced, 4-Speed Water Referenced Type) PGN 128267 - Water Depth (Fields:...

  8. How do I display the DST100 Speed Through Water (STW) on Maretron's DSM200 or DSM250 display?How do I display the DST100 Speed Through Water (STW) on Maretron's DSM200 or DSM250 display?
    You display Speed through Water (STW) on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup" and press enter”. Scroll to the Favorite Screen where you would lik...

  9. What is the minimum Speed Through Water (STW) that the DST100 will measure?What is the minimum Speed Through Water (STW) that the DST100 will measure?
    The DST100 accurately measures Speed Through Water (STW) down to 1 knot.

  10. What is the maximum Speed Through Water (STW) that the DST100 will measure?What is the maximum Speed Through Water (STW) that the DST100 will measure?
    The DST100 accurately measures Speed Through Water (STW) up to 60 knots.

  11. I see that Maretron's DSM200 and DSM250 displays have a DST100 configuration setting called "Clear Speed Calibration:", what is this?I see that Maretron's DSM200 and DSM250 displays have a DST100 configuration setting called "Clear Speed Calibration:", what is this?
    Maretron's DSM200 and DSM250 displays have a DST100 configuration setting called "Clear Speed Calibration:", which is used wipe out or clear the multiplier used by the displays to adjust the Speed Thr...

  12. Is it possible to calibrate Speed Through Water (STW) within the DST100?Is it possible to calibrate Speed Through Water (STW) within the DST100?
    Unfortunately, the DST100 can not be calibrated for Speed Through Water (STW), however, the DSM200 and DSM250 can adjust the values coming from the DST100 so that you can effectively calibrate STW. On...

  13. I see that Maretron's DSM200 and DSM250 displays have a DST100 configuration setting called "Speed Calibration?", what is this?I see that Maretron's DSM200 and DSM250 displays have a DST100 configuration setting called "Speed Calibration?", what is this?
    Maretron's DSM200 and DSM250 displays have a DST100 configuration setting called "Speed Calibration?", which is used to set a multiplier for adjusting the Speed Through Water (STW) coming from the DST...

  14. How do I clear the DST100 Speed Through Water (STW) calibration using Maretron's DSM200 or DSM250 display?How do I clear the DST100 Speed Through Water (STW) calibration using Maretron's DSM200 or DSM250 display?
    You clear the Speed Through Water (STW) calibration on individual DSM200s or DSM250s in the following way. Enter the menu mode, scroll to "Configuration..." and press enter. Scroll to "Device Configur...

  15. How do I display the DST100 water depth on Maretron's DSM200 or DSM250 display?How do I display the DST100 water depth on Maretron's DSM200 or DSM250 display?
    You display the DST100 water depth on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like...

  16. What is the minimum depth that the DST100 will measure?What is the minimum depth that the DST100 will measure?
    The DST100 measures depth down to approximately 1.5 feet or 0.4meters.

  17. What is the maximum depth that the DST100 will measure?What is the maximum depth that the DST100 will measure?
    The DST100 measures depth up to approximately 200 feet or 60 meters.

  18. How do I display the DST100 transducer offset on Maretron's DSM200 or DSM250 display?How do I display the DST100 transducer offset on Maretron's DSM200 or DSM250 display?
    You display the DST100 transducer offset on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you woul...

  19. I see that Maretron's DSM200 and DSM250 displays have a DST100 configuration setting called "Transducer Depth Offset:", what is this?I see that Maretron's DSM200 and DSM250 displays have a DST100 configuration setting called "Transducer Depth Offset:", what is this?
    Transducer offset is either 1) the distance from the waterline to the transducer (DST100 bottom surface), or 2) the distance from the transducer to the bottom of the vessel. Maretron display products ...

  20. How do I set the transducer offset within the DST100 using Maretron's DSM200 or DSM250 display?How do I set the transducer offset within the DST100 using Maretron's DSM200 or DSM250 display?
    You set the DST100 transducer offset from a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Configuration?" and press enter. Scroll to "Device Configuration?" and press enter. Scrol...

(Page 1 of 3)     «« |  Prev | 1 | 2 | 3 | Next | »»

Powered by Interspire Knowledge Manager Knowledgebase Software

HOME
PRODUCTS
SUPPORT
COMPANY
HOW TO BUY
© 2009 Maretron, LLP. All rights reserved.
Visit Carling Technologies, a partner company, and its subsidiary, Moritz Aerospace.