N2KView-Video is designed to display data from IP cameras produced by AXIS Communications. The cameras are connected to the computer running N2KView via Ethernet or wireless. The following cameras are currently supported:
-Axis 209FD-R Network Camera. This is a low-profile camera powered over the Ethernet cable. -Axis 212 PTZ Network Camera. This is a wall-mounted camera with software pan Tilt and Zoom. -Axis 215 PTZ Network Camera. This is a sophisticated camera with hardware Pan Tilt and Zoom. It requires a 12V power supply which is supplied with the camera. -Axis P3301 Fixed Dome Network Camera
-Axis Single Video Server 241S
-Axis Quad Video Server 241Q
-USB Camera (limited functionality)
The two video servers allow the connection of analog cameras to the video server using co-axial cable, which then serves the video to N2KView via Ethernet. The cameras require a separate 12V power supply. Connection of IP cameras requires knowledge of computer networks to allocate an address to the cameras. The camera is identified by N2KView by this address (see attached N2KView manual section 7.4 for more information). In simple networks, this address (the IP address) can be permanently set inside the camera; in more complex networks a server can dynamically allocate the IP address to the camera, and the camera addressed though it’s name..
Data Sheets for above cameras can be found using this link: http://www.axis.com
Search the Knowledgebase
Browse by Category
Print this page
Email this page
Post a comment
Subscribe me
Add to favorites
Remove Highlighting
Edit this Article
