1.8.3 (2009-03-20)

- Added translation for 130576 (Small Craft Status) to NMEA 0183 XDR sentence for trim tabs

1.8.2 (2008-03-10)

- Reduced network load when searching for devices on powerup

1.8.1 (2008-03-03)

- Fixed problem where the device tried to transmit a PGN before it had acquired a node address

- Increased the number of devices that are supported in the Device Selection menu from 50 to 256

1.7.2 (2007-10-16)

- Added PGN 126996 to received PGN list  in NMEA0183 mode

- Add support for single frame proprietary (Global) PGN 65280-65535 and fast packet proprietary (Global) PGN 130816-131071

1.7.1 (2007-07-09)

- Added support for draft NMEA 2000 intelligent gateway specification

- Added support to keep connection to the USB port if NMEA 2000 power is interrupted

- Added notification to the connected computer when the NMEA 2000 power is lost

- Changed to always restart in NMEA 0183 mode on power-up (rather than previous mode)

- Add ability to respond to USB node reset command

1.6.5 (2006-11-09)

- Added translations for fluid level and engine messages

USB100 SW 1.6.4 (2005-09-20)

- Added support for USB 2.0 hubs

- Updated supported version of the NMEA 2000 protocol to 1.200

1.6.3 (2005-07-22)

- Added support for Environmental PGN 130311

1.6.2 (2005-06-23)

- Changed NMEA 2000 protocol behavior

1.5 (2005-02-10)

- Made improvements in remote device selection copying

1.4 (2005-02-09)

- Removed some translations to free up space in program memory

1.3 (2005-02-07)

- Changed NMEA 2000 protocol behavior

1.2 (2005-02-04)

- Initial public release