 Search the Knowledgebase |
 Browse by Category |
|
|
|
|
|
| What messages (or PGNs) does the J2K100 transmit? |
|
Article Details
Last Updated:
January 14, 2010
Article ID:
223
|
|
Thank you for rating this answer.
|
The J2K100 transmits the following messages (or PGNs) depending on what J1939 messages (or PGNs) are received by the J2K100:
PGN 127488 - Engine Parameters (Fields: 1-Engine Instance, 2-Engine Speed 3-Engine Boost Pressure, 4-Engine Tilt & Trim)
PGN 127489 - Engine Parameter Dynamic (Fields: 1-Engine Instance, 2-Engine Oil Pressure, 3-Engine Oil Temp, 4-Engine Temp, 5-Altinator Potential, 6-Fuel Rate, 7-Total Engine Hours, 8-Engine Coolant Pressure, 9-Fuel Pressure, 11-Engine Discrete Warning Status, 12-Engine Discrete Status 2, 13-Percent Engine Load, 14-Percent Engine Torque,
PGN 127493 - Transmission Parameters Dynamic (Fields: 1-Transmission Instance, 2-Transmision Gear, 3-Reserved, 4-Transmission Oil Pressure, 5-Trans. Oil Temp, Trans Discrete Status)
PGN 065030 - J1939 Generator Average Basic AC Quantities (Fields:
PGN 127504 - AC Output Status (Fields: 1-AC Instance, 2-Number of Lines, 3-Line, 4-Waveform, 6-Reserved Bits, 7-Current, 8-Frequency, 9-Breaker Size, 10-Real Power, Reactive Power, Power Factor)
|
Print this page
Email this page
Post a comment
Subscribe me
Add to favorites
Remove Highlighting
Edit this Article
