Maretron Support Knowledge Base

Search the Knowledgebase	Browse by Category
[Advanced Search]

View Articles by Category

There are no sub categories

MBB100

Maretron Black Box

There were 3 articles found in this category:

What are the Voltage specifications for each Maretron device?
Maretron Model Device Description NMEA2000 Operating Voltage Engine/Battery Interface SSC200 NMEA 2000 Solid State Compass HW 1.0 9 to 16 Volts USB100 NMEA 2000 / NMEA 0183 Gateway 9 to 16 Volts DSM200 NMEA 2000 Multi-function Display 9 to 16 Volts GPS100 NMEA 2000 GPS Antenna / ...
What type of information can be viewed on Maretron's display products, and what products are required to generate the data to be displayed?
To get an understanding of what parameters Maretron's displays are capable of showing, and what equipment is necessary for generating the displayed data, please see the attached file, which is entitled "Maretron Capability Matrix.pdf".
What IP settings does Maretron recomended for the IPG100 connection to a dedicated N2KView (DSM800 or MBB100) to work properly?
Maretron recommends the following configuration setting to successfully make a connection between N2KView running on a DSM800 or MBB100 to the IPG100. First configure the IPG100 using the DSM250. The command routine is as follows go to Main Menus<Configuration<Device Configuration<IPG10 ...