Maretron Support Knowledge Base

Knowledgebase Home > NMEA2000 Network Design and Maintenance Tools > N2KAnalyzer | Glossary | Favorites | Contact

Search the Knowledgebase	Browse by Category
[Advanced Search]

View Articles by Category

There are no sub categories

N2KAnalyzer

Maretron's analysis and product configuration software.

There were 9 articles found in this category:

Using the N2KAnalyzer how do I recover a device?
The N2KAnalyzer software can restore a devices software using the following method: Select the affected device(represented by a row with light gray serial number shown), right-click to highlight the row, select "Update selected device software". A window will prompt you to enter the device' ...
I have configured my DSM250, how do I perform a Backup?
Now that you have configured your DSM250 just the way you want it, you can backup all your work using the following method. You will need to have several items installed on the NMEA2000 bus and your PC to begin: A. USB100 B. DSM250 C. N2KAnalyzer 1. Start the N2KAnalyzer program and verify you ...
What changes have taken place with the N2KAnalyzer?
What changes have taken place with the N2KAnalyzer? Current Version Available: N2KAnalyzer 2.0.7 Please see attached release notes describing the latests N2KAnalyzer changes and updates. New configuration options. New "Boat File" backup features. Connects to IPG100. Visit our downloads pag ...
How to save/load a configuration file for a TLM100 using the N2KAnalyzer?
The N2KAnalyzer has a feature that allows you to load or save a configuration table for any TLMXXX on an N2K network. To load/save a configuration file, use the following process: 1. Start the N2KAnalyzer program. 2. Select a Gateway to access your N2K Network. 3. Select the TLMXXX product you w ...
Can Maretron's DSM250 display or N2KAnalyzer configure certain Airmar transducers?
Yes, Maretron's multi-function color display (DSM250) or Maretron's N2KAnalyzer configuration tool (used in conjunction with the USB100 gateway) can be used to configure certain Airmar transducers. Please see the attached pdf file for a table of the products and parameters that can be configured.
When I try to run N2KAnalyzer I receive an error message asking for XMLLITE.DLL.
XMLLITE.dll is a file used in performance XML based applications. If the file has been damaged or removed from your system; it can be reinstalled using the following link: http://www.microsoft.com/downloads/details.aspx?familyid=D7B5DC81-AD14-4DE2-8AD5-8C4A9AAB5992&displaylang=en
How do I a create a vessel's N2K network file (Boat File)?
You create, or save, a boat file through the file menu within N2KAnalyzer. First, left click on the "File" menu item found near the top left hand side of the N2KAnalyzer window. Next, left click on the "Save As..." menu item. A file browser window will appear with the default location where N2K ...
What is an N2K Analyzer boat file?
N2KAnalyzer allows you to view or save status of any N2K network interfaced too using the USB100. Maretron calls this file "The Boat File" You can view the Boat File back into N2KAnalyzer at a later time or you can send the boat file to Maretron's Technical Support for analysis.
How do I read a previously saved boat file back into N2KAnalyzer?
You read a previously saved boat file back into N2KAnalyzer by dropping down the file menu and right clicking on the "Open..." menu item. You can only read a boat file back into N2KAnalyzer if the current connection mode is offline or in other words, N2KAnalyzer is disconnected from an NMEA 200 ...