 Search the Knowledgebase |
 Browse by Category |
|
|
|
| View Articles by Category |
|
There are no sub categories
|
USB100
|
There were 10 articles found in this category:
 Using the N2KAnalyzer how do I recover a device?
The N2KAnalyzer software can restore a devices software using the following method: Select the affected device(represented by a row with light gray serial number shown), right-click to highlight the row, select "Update selected device software". A window will prompt you to enter the device' ...
- What are the Voltage specifications for each Maretron device?
Maretron Model Device Description NMEA2000 Operating Voltage Engine/Battery Interface SSC200 NMEA 2000 Solid State Compass HW 1.0 9 to 16 Volts USB100 NMEA 2000 / NMEA 0183 Gateway 9 to 16 Volts DSM200 NMEA 2000 Multi-function Display 9 to 16 Volts GPS100 NMEA 2000 GPS Antenna / ...
- What type of information can be viewed on Maretron's display products, and what products are required to generate the data to be displayed?
To get an understanding of what parameters Maretron's displays are capable of showing, and what equipment is necessary for generating the displayed data, please see the attached file, which is entitled "Maretron Capability Matrix.pdf".
- GWUtilities and USB100 drivers
What software changes have been made to GWUtilities and USB100 drivers? Changes in the USB100 Drivers and Support Software version 2.1 from version 2.0a: - Support has been added for the following operating versions of Microsoft Windows: · Windows XP 64-bit ...
- What firmware changes have taken place on the Maretron USB100?
What firmware changes have taken place on the Maretron USB100? USB100 Firmware Versions: 1.8.3 (2009-03-20) - Added translation for 130576 (Small Craft Status) to NMEA 0183 XDR sentence for trim tabs 1.8.2 (2008-03-10) - Reduced network load when searching for devices on powerup 1.8.1 ( ...
- Does Maretron make a waterproof USB cable for connecting the USB100 to a computer?
No, Maretron does not make a waterproof USB cable for connection between the USB100 and a computer. However, a waterproof cable can be built using the following parts, which can be ordered from http://www.digikey.com/ A-KAB-USBB-MS-1M-R A-USBPA-R A-USBPA-HOOD-R
- Does the USB100 convert NMEA 2000 engine PGNs to NMEA 0183 sentences?
Yes, the USB100 converts some of the NMEA 2000 engine PGN information into NMEA 0183 sentences. Please refer to the document entitled “USB100 Engine Sentences.pdf”, which can be found below in the Attachments section.
- Does the USB100 work with MAC OSX?
The USB100 uses the standard CDCACM driver for Mac based OSX computers.
- Does Maretron have Linux driver for the USB100?
The USB100 is compatible with Linux using standard CDCACM drivers available withing the OS. Refer to the following link for details:http://www.jungo.com/st/drivercore/cdc_acm_driver.html
- My USB100 interface is in use by the navigational program on my PC. Can N2Kview interface with that same com port?
The USB100 can only be in use by one program at a time. The remedy is a USB100 will be in use by your navigational software. A second USB100 gateway will provide data to the vessel monitoring program, such as N2KView.
|
