What are the latest changes that have been made to N2KView?
Maretron announces the release of version 3.0 of the N2KView® NMEA 2000 Network Display Software. The program is available from (http://www.maretron.com/downloads), under the “Software Updates” category. Details of the latest point release for 3.0 is available ...
What firmware changes have taken place on the Maretron SSC200?
SSC200 Firmware Versions. (Download the latest N2KAnalyzer to update your device firmware to the latest version listed below) 3.0.2 (2010-05-28) - Corrected a problem where a heading of 0° was occasionally mistakenly output when actual heading was 180°. This could be seen by a ...
What changes have taken place with the N2KAnalyzer?
Current Version Available: N2KAnalyzer 1.4.17 Please see attached release notes describing the latests N2KAnalyzer changes and updates. Visit our downloads page to get the latest N2KAnalyzer: http://www.maretron.com/support/downloads.php
What software changes have been made to GWUtilities and USB100 drivers?
Changes in the USB100 Drivers and Support Software version 2.1 from version 2.0a: - Support has been added for the following operating versions of Microsoft Windows: · Windows XP 64-bit · Windows Vista 64-bit · Windows 7 32-bit · ...
What firmware changes have taken place on the Maretron J2K100?
J2K100 Firmware Versions1.0.9 (2010-03-18) - Added support for use as a gateway for a Dometic (MarineAir Elite and CruiseAir Q-Logic)Air Conditioner or a Dometic (Eskimo) Icemaker. 1.0.7 (2009-03-04) - Added support for labeling so that the device can easily be identified ...
What firmware changes have taken place on the Maretron DSM250?
DSM250 firmware versions 1.4.6 (2010-03-18) - Added line graph support for most data types. - Added support to configure J2K100’s to support Dometic (MarineAir Elite and CruiseAir Q- Logic) Air Conditioners and Dometic (Eskimo) Icemakers – J ...
What firmware changes have taken place on the Maretron GPS100?
GPS100 Firmware Versions 2.0.2 (2010-02-11) - Updated the magnetic variation function to use the new WMM2010 coefficients. This corrects a problem where magnetic variation is not available, which causes true heading readings to be unavailable or missing 2.0.1 (20 ...
What firmware changes have taken place on the Maretron GPS200?
GPS200 Firmware Versions Version 1.0.6 (2010-02-11) - Updated the magnetic variation function to use the new WMM2010 coefficients. This corrects a problem where magnetic variation is not available, which causes true heading readings to be unavailable or missing Version 1.0.5 (2009-09-11 ...
What firmware changes have taken place on the Maretron WSO100?
WSO100 Firmware Versions: 2.0.13 (2009-02-11) - Reduced the reported LEN (Load Equivalent Number) from 7 to 3 to reflect actual current usage of the device - Improved behavior of humidity readings - Improved behavior of air temperature readings 2.0.12 (2009-02-12) - Added support for labe ...
What firmware changes have taken place on the Maretron RIM100?
RIM100 Firmware Versions 1.1.2 (2009-11-02) - Corrected a problem where the RIM100 would not always properly indicate an “ON” condition for an AC input signal 1.1.1 (2009-02-23) - Added support for labeling so that the device can easily be identified with a user-programm ...
What Maretron devices can one configure with the DSM200 display?
DSM200 was designed and released for sale into the marine market in 2004. It was designed to support Maretron’s envisioned product line at that time. In the years following 2004 Maretron made decisions to expand beyond navigation sensors and released the DSM250 which is capable of wor ...
What are the latest changes that have been made to N2KBuilder?
Maretron announces the release of version 1.1.1 of the N2KBuilder™ NMEA 2000 Network Design Software. The program is available from (http://www.maretron.com/downloads), under the “Software Tools” category. For existing users, N2KBuilder™ will automatically find and instal ...
What firmware changes have taken place on the Maretron DSM200?
DSM200 Firmware Versions: 1.15.0 (2006-12-21) - Added support for alarms on tank levels 1.14.1 (2006-10-03) - Corrected some translation issues in Dutch language support 1.14 (2006-09-11) - Added ability to use a DST100 for inside temperature by choosing “Display Settings->DST1 ...
What firmware changes have taken place on the Maretron USB100?
USB100 Firmware Versions: 1.8.3 (2009-03-20) - Added translation for 130576 (Small Craft Status) to NMEA 0183 XDR sentence for trim tabs 1.8.2 (2008-03-10) - Reduced network load when searching for devices on powerup 1.8.1 (2008-03-03) - Fixed problem where the device tried to transmit ...
What firmware changes have taken place on the Maretron TMP100?
TMP100 Firmware Versions: 1.1.1 (2009-02-23) - Added support for labeling so that the device can easily be identified with a user-programmable string 1.0.3 (2008-11-10) - Allow channels to be programmed with different source types but the same instance number 1.0.2 (2008-11-07) - Made PGN ...
What firmware changes have taken place on the Maretron TLM100?
TLM100 Firmware Versions 1.1.5 (2009-08-10) - Added capability to have the level/distance table be configured by N2KAnalyzer 1.1.4 (2009-03-20) - Made improvements to label implementation 1.1.3 (2009-02-06) - Corrected issue that caused custom calibration to not work 1.1.2 (2009-02-0 ...
What firmware changes have taken place on the Maretron TLA100
TLA100 Firmware Versions 1.6.15 (2009-08-10) - Added capability to have the resistance/level table configured by N2KAnalyzer 1.6.14 (2009-03-20) - Fixed a problem with custom calibration introduced in version 1.6.13 1.6.13 (2009-02-03) - Added support for labeling so that the devi ...
Search the Knowledgebase
Browse by Category
