Maretron Support Knowledge Base

Knowledgebase Home > General Monitoring > TMP100 | Glossary | Favorites | Contact

Search the Knowledgebase	Browse by Category
[Advanced Search]

View Articles by Category

There are no sub categories

TMP100

Temperature Monitor

There were 10 articles found in this category:

Using the N2KAnalyzer how do I recover a device?
The N2KAnalyzer software can restore a devices software using the following method: Select the affected device(represented by a row with light gray serial number shown), right-click to highlight the row, select "Update selected device software". A window will prompt you to enter the device' ...
What is the supplied cable length of the TR3K and is it possible to extend the cable?
Maretron uses a 2.5K ohm thermistor so you can extend the cable with an understanding that an error is introduced into the system as a function of the additional wire resistance. The length of the cable is 10 feet or 3 meters. The temperature connection whole size 5/16” or 8mm.
What are the Voltage specifications for each Maretron device?
Maretron Model Device Description NMEA2000 Operating Voltage Engine/Battery Interface SSC200 NMEA 2000 Solid State Compass HW 1.0 9 to 16 Volts USB100 NMEA 2000 / NMEA 0183 Gateway 9 to 16 Volts DSM200 NMEA 2000 Multi-function Display 9 to 16 Volts GPS100 NMEA 2000 GPS Antenna / ...
What type of information can be viewed on Maretron's display products, and what products are required to generate the data to be displayed?
To get an understanding of what parameters Maretron's displays are capable of showing, and what equipment is necessary for generating the displayed data, please see the attached file, which is entitled "Maretron Capability Matrix.pdf".
What type of solderless connector is ideal for mating sensor wire to Maretron multi-channel products?
A #4 Nylon Double-Crimp Insulated Ring Terminal( P/N:WT-651045) is the ideal choice when connecting sensor wire to any of Maretron's multi-channel devices. The following link provides a great color selection to choose from: http://www.wiringproducts.com - Mike Voorhees from Yacht Masters ...
What firmware changes have taken place on the Maretron TMP100?
What firmware changes have taken place on the Maretron TMP100? TMP100 Firmware Versions: 1.1.1 (2009-02-23) - Added support for labeling so that the device can easily be identified with a user-programmable string 1.0.3 (2008-11-10) - Allow channels to be programmed with different source type ...
What are the dimensions of the Exhaust Gas Temperature (EGT) accessory probe (Maretron part number TP-EGT-1) used with the TMP100?
Please see the attached pdf file for the dimension of the EGT probe.
Can I install a Maretron TMP100 EGT accessory probe downstream of the water cooled exhaust riser or elbow?
No, Maretron’s EGT sensor is meant to measure the temperature of the exhaust gas temperature, not the temperature of the exhaust gas after it has been cooled by water. Placing the EGT probe downstream of the riser or elbow will render the device inoperative very quickly. When sulfur dio ...
What are the weights and dimensions of Maretron products?
How do I configure a channel on the TMP100 using Maretron's DSM250?
You configure a channel on the TMP100 in the following way. Enter main menu mode, scroll to "Configuration?" and press enter. Scroll to "Device Configuration?" and press enter. Scroll to the row containing TMP100 and press enter. Select one of six channels and press enter. Select instance pre ...