Privacy Policy  |  Contact Us
Maretron Support Knowledge Base

Knowledgebase Home > Engine Monitoring > J2K100 | Glossary | Favorites | Contact Knowledgebase Home | Glossary | Favorites | Contact
Search the Knowledgebase Browse by Category

[Advanced Search]
View Articles by Category
There are no sub categories
J2K100 rss button
J1939/NMEA 2000 Gateway
 (Page 1 of 4)     «« |  Prev | 1 | 2 | 3 | 4 | Next | »»
There were 63 articles found in this category:
  1. questionUsing the N2KAnalyzer how do I recover a device?
    The N2KAnalyzer software can restore a devices software using the following method: Select the affected device(represented by a row with light gray serial number shown), right-click to highlight the row, select "Update selected device software". A window will prompt you to enter the device' ...

  2. questionWhat marine engines are found to have J1939 capability?
    Known J1939 Capable Engines Engine manufacturer Controller Module Yes: J1939 Tx Caterpillar ADEM III and A4/C4.4, C6.6, C9, C15, C18, C32 "Acerts series" Yes: J1939 Tx Cummins CM570 and CM850/QSL, QSB5 and 7, QSM11, QSK19,50 and 60 Yes: J1939 Tx Detroit Diesel ...

  3. questionWhat firmware changes have taken place on the Maretron J2K100?
    Gyroscope Sensitivity Calibration and Correcting Horizontal Magnetic Field Distortion (Deviation) What firmware changes have taken place on the Maretron J2K100? Update your device today using the N2KAnalyzer software tool. 1.0.13.2 (2011-10-25) - Corrects an issue with controlling multiple D ...

  4. questionDo gasoline engines with an electronic control module(ECM) have J1939 compatibilities?
    Most Gasoline engines come equipped with a standard ECM which communicates the J1939 protocol. One of the most common ECMs found today on many gasoline engines happens to be manufactured by Delphi and is commonly called MeFi. This particular ECM can be found on many manufacture make engines the ...

  5. questionWhat are the Voltage specifications for each Maretron device?
    Maretron Model Device Description NMEA2000 Operating Voltage Engine/Battery Interface SSC200 NMEA 2000 Solid State Compass HW 1.0 9 to 16 Volts USB100 NMEA 2000 / NMEA 0183 Gateway 9 to 16 Volts DSM200 NMEA 2000 Multi-function Display 9 to 16 Volts GPS100 NMEA 2000 GPS Antenna / ...

  6. questionWhat type of information can be viewed on Maretron's display products, and what products are required to generate the data to be displayed?
    To get an understanding of what parameters Maretron's displays are capable of showing, and what equipment is necessary for generating the displayed data, please see the attached file, which is entitled "Maretron Capability Matrix.pdf".

  7. questionCan the J2K100 connect to a Cummins Vessel Integration Panel?
    The J2K100 can be connected to a Cummins Vessel Integration Panel via the J1939 diagnostic port located on the panel itself. Please review the image posted below. Additional non-Maretron parts will be needed to complete the connections to the panel. (image file attached below this article) Spec ...

  8. questionHow do I display the J2K100 engine coolant temperature on Maretron's DSM200 or DSM250 display?
    You display the J2K100 engine coolant temperature on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the coolant temperature and press enter. Scroll to "Data:" and press ent ...

  9. questionDoes Maretron have a interface cable for Caterpillar engine networks to the J2K100 device?
    The MCF-2M-D12CAT cable is used to interface a J2K100 to a CAT marine power display. It is recommended that the MCF-2M-D12CAT cable should connect to one of two ports on the CAT display. The ideal connection should be the occupied twelve pin connector. (Note: some CAT marine power displays have ...

  10. questionHow do I determine if the J2K100 is compatible with my Caterpillar engines?
    Caterpillar engines are confirmed to have J1939 available on production years 2000 and up. Previous engines may or may not have J1939 available, therefore the installer must do a visual assessment of the existing engine installation. There are several ways to determine if your Caterpillar engin ...

  11. questionWhat are the weights and dimensions of Maretron products?


  12. questionWhat information does the J2K100 provide over the NMEA 2000 network?
    As long as the engine or generator is providing the appropriate information via the J1939 interface, the J2K100 is capable of producing the following NMEA 2000 information; engine speed (tachometer), engine boost pressure, engine oil pressure, engine oil temperature, engine coolant temperature, ...

  13. questionWho makes J1939 connectors?
    A predominate manufacturer of J1939 connectors is Deutsch Industrial. Please see the attached document entitled "Deutsch Controller Area Network Series Technical Manual" for more information.

  14. questionHow is J1939 different than NMEA 2000?
    J1939 and NMEA 2000 networks are both based on the same hardware (Controller Area Network (CAN)), and both protocols use the same message format (the messages are actually compatible and can coexist on the same network). The differences between the two networks has to do with addressing. In J193 ...

  15. questionHow do I display the J2K100 engine oil pressure on Maretron's DSM200 or DSM250 display?
    You display the J2K100 engine oil pressure on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the oil pressure and press enter. Scroll to "Data:" and press enter. Scroll to ...

  16. questionHow do I display the J2K100 transmission oil temperature on Maretron's DSM200 or DSM250 display?
    You display the J2K100 transmission oil temperature on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the oil temperature and press enter. Scroll to "Data:" and press enter ...

  17. questionI see that Maretron's DSM200 and DSM250 displays have a J2K100 configuration setting called "J1939 Diagnostic Messages:", what is this?
    Maretron's DSM200 and DSM250 displays have a J2K100 configuration setting called "J1939 Diagnostic Messages:", which is used to configure the J2K100 to pass diagnostic messages from the J1939 network through to the NMEA 2000 network. Normally, the J2K100 blocks all J1939 diagnostic messages, alt ...

  18. questionHow do I display the J2K100 engine fuel rate on Maretron's DSM200 or DSM250 display?
    You display the J2K100 engine fuel rate on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the fuel rate and press enter. Scroll to "Data:" and press enter. Scroll to "Engin ...

  19. questionWhat is J1939?
    J1939 is a Society of Automotive Engineers (SAE) networking standard that is similar to NMEA 2000. Both network protocol standards are based on the same hardware called Controller Area Network (CAN) and both protocols use the same message format. The difference between J1939 and NMEA 2000 is tha ...

  20. questionHow do I display the J2K100 generator average AC current on Maretron's DSM200 or DSM250 display?
    You display the J2K100 generator average AC current on a DSM200 or DSM250 in the following way. Enter menu mode, scroll to "Favorite Screen Setup..." and press enter. Scroll to the favorite screen where you would like to view the current and press enter. Scroll to "Data:" and press enter. Scroll ...

(Page 1 of 4)     «« |  Prev | 1 | 2 | 3 | 4 | Next | »»

Powered by Interspire Knowledge Manager Knowledgebase Software

HOME
PRODUCTS
SUPPORT
COMPANY
HOW TO BUY
© 2012 Maretron, LLP. All rights reserved.
Visit Carling Technologies, a partner company.